To check the fuse on the StripMeister E2000 follow these 4 easy steps:


  1. Unplug the StripMeister E2000
  2. Locate the the 4 screws on the drive cover.
  3. Remove the 4 M3 screws
  4. The fuse will be located directly inside.



If the fuse needs to be replaced:


The StripMeister E2000 takes a 10A Ceramic Cylinder, Non-Resettable, Time-Lag, 250VAC, 5x20mm Fuse (Allied Electronic #70160162). You can find the fuse by clicking this link.