StripMeister E350 Product Specifications
The StripMeister E350 can strip between 70 and 110 feet per minute with the adjustable speed control.
Fri, 14 Feb, 2020 at 1:50 PM
The StripMeister E350 features a 1/4 HP DC motor with a variable speed controller.
Fri, 14 Feb, 2020 at 1:51 PM
The StripMeister E350 motor's frequency is 60Hz.
Fri, 14 Feb, 2020 at 1:52 PM
The StripMeister E350 rated input is 3A.
Fri, 14 Feb, 2020 at 1:54 PM
The StripMeister E350 wire stripper can cut wire from #18 AWG to 350 MCM Diameters from 0.100″ (3mm) up to 0.95″ (24.1mm) including ROMEX and braided (stra...
Fri, 14 Feb, 2020 at 1:56 PM
The StripMeister E350 weighs 22 lbs.
Fri, 14 Feb, 2020 at 1:57 PM
The dimensions of the StripMeister E350 are 14x11x17 inches
Fri, 14 Feb, 2020 at 1:59 PM
The StripMeister E350 takes a T8A Ceramic Cylinder, Time-Lag, 250VAC/UL/CSA, 5x20mm Fuse. You can find the fuse by clicking this link.
Fri, 14 Feb, 2020 at 2:00 PM
You can register your StripMeister by clicking the corresponding link below. United States Registration Page Canada Registration Page
Fri, 14 Feb, 2020 at 2:01 PM
The StripMeister E350 runs off any standard 110/120V household outlet.
Fri, 14 Feb, 2020 at 2:03 PM