StripMeister E250 Product Specifications
The StripMeister E250 can strip between 70 and 110 feet per minute with the adjustable speed control.
Wed, 20 Sep, 2017 at 4:57 PM
The StripMeister E250 features a 1/4 HP 110-240 VAC 60/50hz single phase DC motor with a variable speed controller.
Mon, 18 Oct, 2021 at 10:42 AM
The StripMeister E250 motor's frequency is 60Hz.
Wed, 20 Sep, 2017 at 4:59 PM
The StripMeister E250 rated input is 3A.
Wed, 20 Sep, 2017 at 5:01 PM
The StripMeister E250 wire stripper can cut wire from #18 AWG to 250 MCM Diameters from 0.100″ (3mm) up to 0.79″ (20.1mm)
Wed, 20 Sep, 2017 at 5:04 PM
The StripMeister E250 weighs 19 lbs.
Thu, 21 Sep, 2017 at 10:06 AM
The StripMeister E250 has single phase
Mon, 18 Oct, 2021 at 10:43 AM
The StripMeister E250 shipping dimensions are 10" wide x 12" High x 16" deep.
Thu, 21 Sep, 2017 at 10:10 AM
The StripMeister E250 takes a T8A Ceramic Cylinder, Time-Lag, 250VAC/UL/CSA, 5x20mm Fuse. You can find the fuse by clicking this link.
Thu, 21 Sep, 2017 at 10:21 AM
You can register your StripMeister by clicking the corresponding link below. United States Registration Page Canada Registration Page
Fri, 16 Feb, 2018 at 1:31 PM