To check the fuse on the StripMeister E500 follow these 4 easy steps:

  1. Unplug the StripMeister E500
  2. Locate the 4 screws behind the drive cover 
  3. Remove the 4 M3 screws 
  4. The fuse will be located directly inside.


If the fuse needs to be replaced:

To replace the StripMeister E500 fuse you will need a T8A Ceramic Cylinder, Time-Lag, 250VAC/UL/CSA, 5x20mm Fuse. You can find the fuse by clicking this link.