To check the fuse on the StripMeister E2000X follow these 4 easy steps:

  1. Unplug the StripMeister E2000X
  2. Locate the panel below the power button. 
  3. Remove the 4 M3 screws 
  4. The fuse will be located directly inside.


If the fuse needs to be replaced:

To replace the StripMeister E2000X fuse you will need a 10A Ceramic Cylinder, Non-Resettable, Time-Lag, 250VAC, 5x20mm Fuse (Allied Electronic #70160162). You can find the fuse by clicking this link.